Honda HSM1380i, Руководство пользователя

Страница: 55 / 130

53
Auger housing height
1. Operate the auger housing control switch back and forth. The auger
housing height can be adjusted without discrete steps.
To raise: Pull the auger housing control switch to UP.
To lower: Push the auger housing control switch to DOWN.
2. Release the auger housing control switch, and the auger housing is
secured in the position.
HIGH: Use this position when clearing the snow in steps and use
it when reversing or driving the snow thrower. (When the
ICS switch (HSM1380i) is ON/the mode selector switch
(HSM1390i) is AUTO or POWER, use this position when
reversing the snow thrower.)
MIDDLE: Position for normal clearing. (Use this position to clear the
snow normally.)
LOW: Position for clearing hardened snow. (Use this position
when the snow you are to clear is hardened and the snow
clearing part of the snow thrower tends to get raised.)
DOWN DOWN
UP UP
UP UP
DOWN DOWN
AUG UGER HOUSIN OUSING
CONTRO ROL SWITCH
DOWN
UP
UP
DOWN
AUGER HOUSING
CONTROL SWITCH
MIDDLE
AUGER HOUSING
LOW (DOWN)
HIGH (UP)
[Example: HSM1380i (ETDR type)]
36V156410.book 53 ページ ２０１８年１０月１０日 水曜日 午前１１時３０分