Honda HSM1336i, Руководство пользователя

Страница: 70 / 144

68
OPERATION
CLEARING SNOW
For efficient operation, it is important to select an adequate engine
speed for the required snow discharge distance and clear the snow
without lowering the engine speed. If the engine speed keeps
dropping by setting the main shift lever in the slow position, clear the
snow as follows.

Clearing in narrow width
When the snow is deep or hard, set the main shift lever in slow and
clear the snow using a narrower clearing width (less than the width
of the snow blowing mechanism).

Clearing with back and forth motions
If the snow is so hard that the snow blower tends to ride over the
surface, push it back and forth to remove snow gradually.
When the mode selector switch is in AUTO or POWER, the auger
housing automatically rises while going in reverse.
USA model only:
In case the auger clutch switch is in the ON position, the auger is
automatically returned to the original position when the snow blower
is transporting forward again.
31V15621.book 68 ページ ２０１８年１０月１０日 水曜日 午前１１時４分