5
ENGLISH
CONTROLS
FUEL VALVE
The fuel valve [1] opens and closes the
connection between the fuel tank and the
carburetor.
THROTTLE LEVER
The throttle lever [1] controls the following functions:
ENGINE SWITCH (HZE TYPE)
CUTTING-MEANS CONTROL
The button [1] and
cutting-means control lever
[2] start and stop cutting
means rotation.
See page 10 for more
detailed information.
DRIVE CLUTCH CONTROL
The drive clutch control [1]
engages and disengages the
transmission.
SHIFT LEVER
The shift lever [1] selects and
controls the mower’s drive
speed.
With the shift lever [1] all the
way back [A] and the drive
clutch control engaged, the
mower will move slowly or
not at all. Use a slow speed
for mowing thick grass or
maneuvering in small areas.
Use position [B] for
maximum self-propelled
speed in large, open areas,
and for transport.
CUTTING HEIGHT ADJUSTMENT LEVERS
There are seven adjustment settings. The cutting height figures are
approximate. The actual height of cut grass will vary with lawn and
soil conditions.
There is one adjustment lever [1]
for each wheel.
FAST
For starting the
engine and for
mowing.
SLOW
For idling the
engine.
STOP
For stopping the
engine. (HZE type;
Turn the key
switch OFF to stop
the engine.)
OFF
Stops the engine.
1.
ON
Running position
(the key switch
must be in the
ON position to
use the recoil
starter).
START
Operates the
electric starter.
ON
OFF
[1]
FAST
[1]
RUN
OFF
START
[2]
[1]
[1]
[1]
A
B
19 mm
32 mm
45 mm
62 mm
75 mm
88 mm
101 mm
[1]
