Honda HRX476XB, Руководство пользователя

Страница: 4 / 104

4 EN
SAFETY STICKERS
Your machine must be used with care. Therefore, decals have been
placed on the machine, to remind you pictorially of main precautions
to take during use. Their meaning is explained below.
These decals are considered as a part of the machine. Should one
become detached or unreadable, contact your servicing dealer for
its replacement.
We also recommend that you read the safety advice carefully
( see page 2 ).
IDENTIFICATION OF MACHINE
GENERAL DESCRIPTION
EQUIPMENT IDENTIFICATION
Do not dispose of electric equipment together with household waste
material. If electrical appliances are disposed of in landfills or
dumps, substances can leak and react and enter into the foodchain,
damaging your health and well-being. For further information on the
disposal of this product, please contact your servicing dealer or your
nearest domestic waste collection service.
[1] WARNING: Read the owner's manual before using the machine.
[2] Risk of projections: Keep third persons away from the area during use.
[3] Risk of cuts. Rotating cutting-means: Do not put hands or feet inside the
cutting-means enclosure. Switch the isolator key to OFF (0) position and
remove the isolator key and the battery pack before adjusting, cleaning and
before leaving the product unattended for any period. The cutting-means
continue to rotate after the motor is switched off.
[4] Do not operate without either discharge cover or grass catcher in place.
[5] Sound power level
[6] CE marking
[7] UKCA marking
[8] Rated voltage
[9] Recommended motor speed in min
-1
[10] Mass in kilograms
[11] Month and year manufacture
[12] Serial number
[13] Model and Type
[14] Name and address of the manufacturer
[15] Name and address of authorized representative
[16] IP code (moisture and dust ingress resistance (only guaranteed with battery
installed))
[2]
[4] [1]
[3]
[14]
[13]
[11] [6] [5]
[16]
[9]
[12]
[8]
[10]
[7]
[15]
CONTROLS FUNCTIONS
[17] Handle
[18] Lever for adjusting the
cutting height. . . . . . . . . . . . . . . . . Selects the desired cutting height
[19] Select Drive control. . . . . . . . . . . . Transmission control which drives
the rear wheels. Controls the
maximum drive speed
[20] Cutting-means control lever . . . . . Stops and starts the cutting-means
rotation
[21] Yellow button. . . . . . . . . . . . . . . . . Controls the motor by a dual action
switch to prevent starting it accidentally
[22] Grass catcher . . . . . . . . . . . . . . . . Collects the cut grass
[23] Discharge cover . . . . . . . . . . . . . . Protects from the projections
[24] Variable mulching control . . . . . . . Controls the amount of grass ejected
[25] Rear wheels
[26] Isolator key
[27] Battery cover
[28] Battery cover opening lever
[29] Battery indicator
[30] Motor cooling fins
[31] Quiet mode button. . . . . . . . . . . . . Select the motor speed
[32] Cutting height lever unlocking knob
[33] Folding / handle
adjustment knobs . . . . . . . . . . . . . Allows you to adjust the height of the
handle or to fold the handle
[34] Battery pack
[35] Charger
[35]
[27]
[23]
[32]
[24]
[28]
[17]
[21]
[25]
[33]
[22]
[34]
[20]
[19]
*Dedicated battery pack and charger for these machine are needed for
operation. They are sold separately.
[30]
[31]
[29]
[26]
[18]
Battery pack (option) Charger (option)