Honda HRR216VKA K10, Руководство пользователя

Страница: 51 / 183

3-10
MAINTENANCE HRR216VKA
11. SMART DRIVE CABLE
CABLE CHECK
1. With the engine off, use the multi-position adjuster to set the Smart Drive
control in its lowest position.
2. Gradually push the Smart Drive control down while pulling the lawn
mower backwards.
The rear wheels should lock up before the Smart Drive paddles are
straight down. Ideally, they should lock up at approximately the 5:00
o’clock position.
3. If they don’t, perform the cable adjustment procedure below.
CABLE ADJUSTMENT
1. With the engine off, loosen the adjuster jam nut.
2. Without pushing the Smart Drive control, pull the lawn mower backwards
to check wheel resistance.
3. If no wheel resistance exists, mark the adjuster and TIGHTEN the
adjuster one turn at a time until the wheels lock-up when pulling rearward.
4. Turn the adjuster in the LOOSEN direction 8 complete revolutions.
5. Tighten the jam nut to lock the adjuster in place.
JAM NUT
LOOSEN
TIGHTEN
ADJUSTER
MARK