Honda GXE2.0H, Руководство пользователя

Страница: 16 / 71

2-2
dummyhead dummyhead
SERVICE INFORMATION
SERVICE INFORMATION
MAINTENANCE STANDARDS
TORQUE VALUES
STANDARD TORQUE VALUES
*1: Including SH flange bolt (8 mm head, small flange)
*2: Including NSHF flange bolt (8 mm head, large flange)
LUBRICATION & SEAL POINT
Part Item Standard Service Limit
Motor Stator coil resistance (at 20°C/68°F) 65.5 – 72.5 mΩ –
Item Thread Dia. and pitch
Torque Values
Remarks
N·m kgf·m lbf·ft
Rotor fan bolt M5 x 0.8 5.9 0.6 4.4
Stator bolt M6 x 1.0 10 1.0 7
Motor harness stay bolt M6 x 1.0 10 1.0 7
Cooling fan nut M12 x 1.25 59 6.0 44
Air duct bolt M5 x 0.8 5.9 0.6 4.4
Fastener lever wire bolt M6 x 1.0 10 1.0 7
Harness clip bracket bolt M6 x 1.0 10 1.0 7
Battery connector stay bolt M5 x 0.8 5.9 0.6 4.4
Special collar (at PDU stay C) M8 x 1.25 27 2.8 20
Top cover bolt M6 x 1.0 8 0.8 5.9
Control cover screw (With control box) M5 x 1.8 1.7 0.2 1.3
Speed volume switch nut
(Variable-speed type)
M10 x 0.75 1.1 0.1 0.8
Speed volume switch bracket screw
(Variable-speed type with control box)
M5 x 1.8 1.7 0.2 1.3
Item Thread Dia.
Torque Values
N·m kgf·m lbf·ft
Screw 3 mm 1.0 0.1 0.7
4 mm 2.0 0.2 1.5
5 mm 4.2 0.4 3.1
6 mm 9 0.9 6.6
Bolt and nut 5 mm 5.2 0.5 3.8
6 mm* 1 10 1.0 7
8 mm 22 2.2 16
10 mm 34 3.5 25
12 mm 54 5.5 40
Flange bolt and nut 6 mm* 2 12 1.2 9
8 mm 27 2.8 20
10 mm 39 4.0 29
Material Location Remarks
Multi-purpose grease Rotor shaft bearing part