Honda GOLDWING GL1800/A 2015 Скачать руководство пользователя страница 69

Страница: 69 / 289

Before Riding

Comfort & Convenience Adjustment

Handgrip Heater

The handgrip heater warms up the right and left handgrips of the handlebar for

comfortable riding on a cold day.

The handgrip heater switch is located on the right side of the ignition switch.

To operate, adjust the handgrip heater switch with the engine started. The

handgrip heater switch has 6 positions (OFF, 1, 2, 3, 4, MAX).

handgrip heater switch

RIGHT SIDE OF THE IGNITION SWITCH

To warm up the handgrip heaters, turn the handgrip heater switch toward the

MAX position.

To cool down the handgrip heaters, turn the handgrip heater switch toward the

OFF position.

Do not leave the handgrip heater in the high position for a long time on a warm

day.

Wear gloves to protect your hands from the heated grips.

Do not use the handgrip heater with the engine at idle for a long time. It may

result in a low (or dead) battery.

Содержание GOLDWING GL1800/A 2015


































































































































































































































































































Результаты поиска

Содержание GOLDWING GL1800/A 2015

Отзывы:

Бренды по названию

Популярные бренды

Honda GOLDWING GL1800/A 2015, Руководство пользователя

Результаты поиска

Содержание GOLDWING GL1800/A 2015

Отзывы:

Бренды по названию

Популярные бренды