Honda GOLDWING GL1800/A 2015 Скачать руководство пользователя

Страница: 48 / 289

Before Riding

Are You Ready to Ride?

Before you ride your motorcycle for the first time, we urge you to:

• Read this owner’s manual.

• Make sure you understand all the safety messages.

• Know how to operate all the controls.

Before each ride, be sure:

• You feel well and are in good physical and mental condition.

• You are wearing an approved motorcycle helmet (with chin strap tightened

securely), eye protection, and other protective clothing.

• You don’t have any alcohol or drugs in your system.

Make sure your passenger is ready to ride, too, and is wearing proper gear

including a helmet.

If you are not riding with a passenger and want to carry an extra helmet, use a

commercially-available elastic cord, strap, or net to secure the helmet to the

seat.

The travel trunk may also be used to store an extra helmet.

Protective Apparel

For your safety, we strongly recommend that you always wear an approved

motorcycle helmet, eye protection, boots, gloves, long pants, and a long-sleeved

shirt or jacket whenever you ride.

Although complete protection is not possible, wearing proper gear can reduce

the chance of injury when you ride.

Following are suggestions to help you choose the proper gear.

Содержание GOLDWING GL1800/A 2015


































































































































































































































































































Результаты поиска

Содержание GOLDWING GL1800/A 2015

Отзывы:

Похожие инструкции для GOLDWING GL1800/A 2015

Бренды по названию

Популярные бренды

Honda GOLDWING GL1800/A 2015, Руководство пользователя

Результаты поиска

Содержание GOLDWING GL1800/A 2015

Отзывы:

Похожие инструкции для GOLDWING GL1800/A 2015

Бренды по названию

Популярные бренды