Honda FG110, Руководство пользователя

Страница: 49 / 81

Date of Issue: February, 2005
7-6
© American Honda Motor Co., Inc.
FG110
3. FLYWHEEL
a. DISASSEMBLY
NOTICE
To avoid damage to the flywheel fan blades, position the
strap wrench fulcrum at the flywheel magnetic parts.
1. Hold the flywheel with a commercially available strap
wrench.
2. Remove the 7 mm flange nut from the flywheel.
NOTICE
Do not remove the flywheel by tapping it with a hammer or
you might damage the flywheel
3. Remove the flywheel using a commercially available
flywheel puller.
b. REASSEMBLY
1. Clean the tapered portion of the crankshaft of dirt, oil,
grease, and other foreign material.
2. Install the flywheel, making sure the flywheel key is properly
set in the crankshaft groove.
3. Hold the flywheel with a commercially available strap
wrench. Position the fulcrum at the flywheel magnets.
4. Install the 7 mm flange nut to the specified torque.
TORQUE: 14.7 N•m (1.49 kgf•m, 10.7 lbf•ft)
STRAP WRENCH
(Commercially
available)
MAGNETS
FLYWHEEL PULLER
(Commercially available)
STRAP WRENCH
(Commercially available)
FULCRUM