20
CONTROLS & FEATURES
FEATURES
Oil Alert
®
System
The Oil Alert
®
system is designed to prevent engine damage caused
by an insufficient amount of oil in the crankcase. Before the oil level in
the crankcase can fall below a safe limit, the Oil Alert system will
automatically stop the engine (the engine switch will remain in the ON
position).
If the engine stops and will not restart, check the engine oil level (see
page 49) before troubleshooting in other areas.
Automatic Engine Stop Function
Oil Alert Function
During operation, the engine will automatically stop if there is not
enough oil in the tank. Moreover, if the generator is on a slope, the oil
alert function may operate and stop the engine.
Overspeed Detection Function
To protect the engine from exceeding the engine load, the engine will
automatically stop if the engine speed becomes abnormal.
Abnormal Voltage Detection Function
The engine will automatically stop during generation when it detects
abnormal voltage.
If the engine stops, make sure the oil level is correct. Wait a few
minutes, and then try to restart the engine. If the engine still won’t
start, take the generator to your authorized servicing Honda power
equipment dealer.
31Z238100.book 20 ページ 2014年12月5日 金曜日 午後4時21分
Содержание EB4000
Страница 93: ...91 MEMO 31Z238100 book 91...
Страница 94: ...92 MEMO 31Z238100 book 92...