40
SERVICING YOUR GENERATOR
ENGINE OIL LEVEL CHECK
Check the engine oil level with the generator on a level surface and
the engine stopped.
1. Loosen the maintenance cover screw and remove the maintenance
cover.
2. Remove the oil filler cap and wipe the dipstick clean.
3. Check the oil level by inserting the dipstick into the oil filler neck
without screwing it in.
4. If the level is low, fill to the upper limit of the oil filler neck with the
recommended oil (see page 42).
5. Reinstall the oil filler cap securely.
6. Reinstall the maintenance cover and tighten the maintenance cover
screw securely.
The Oil Alert system will automatically stop the engine before the oil
level falls below safe limits. However, to avoid the inconvenience of an
unexpected shutdown, check the oil level regularly.
MAINTENANCE COVER SCREW
MAINTENANCE
COVER
OIL FILLER NECK
UPPER LIMIT
OIL FILLER CAP
LOWER LIMIT
31Z448020.book 40 ページ 2019年2月8日 金曜日 午前9時16分
Содержание EB2200i
Страница 11: ...9 GENERATOR SAFETY 31Z448020 book 9...
Страница 89: ...87 MEMO 31Z448020 book 87...
Страница 90: ...88 MEMO 31Z448020 book 88...