109
Maintenance
Final Drive Oil
Changing Final Drive Oil
1.
Place your motorcycle on its centre stand
on a level surface.
2.
Place a drain pan under the drain bolt.
3.
Remove the oil fill hole cap, O-ring, drain
bolt and sealing washer to drain the oil.
4.
Install a new sealing washer onto the
drain bolt. Tighten the drain bolt.
5.
Fill the final gear with the recommended
oil.
2
P. 80
6.
Check the oil level. It should be flush with
the lower edge of the oil fill hole.
7.
Install a new O-ring onto the oil fill hole
cap. Tighten the oil fill hole cap.
8.
Check that there are no oil leaks.
Drain bolt
Sealing washer
Oil fill hole cap
Lower edge
O-ring
Torque:
20 N·m (2.0 kgf·m, 15 lbf·ft)
Required oil:
155 cm
3
(5.2 US oz, 5.5 Imp oz)
Torque:
12 N·m (1.2 kgf·m, 9 lbf·ft)
14 CTX1300-32MJN6000.book 109 ページ 2013年12月11日 水曜日 午後2時51分