Setting Mode A
If the
SET
button is not pressed for about 30
seconds, the control is automatically switched
from the setting mode to the ordinary
display.
If the
SET
button is not pressed for about 30
seconds, items in the process of being set will
be discarded and only items where settings
have been finalised will be applied. Only if
the ignition switch is turned to the (Off)
position will items in the process of being set
and those that are finalised be applied.
1 Clock setting:
a
Turn the ignition switch to the (On)
position.
b
Press and hold the
SEL
and the
SET
buttons until the hour digits start flashing.
c
Press the
SEL
button until the desired hour
is displayed.
u
Press and hold the
SEL
button to
advance the hour fast.
d
Press the
SET
button. The minute digits
start flashing.
20200914163746_32K1TB000_eng_BOOK Page 36 Monday, September 14 2020 16:42:25 JST
Operation Guide
33
Continued
