Honda CRF250F 2020, Руководство пользователя

Страница: 67 / 180

60
Servicing Your Honda
Engine Oil
1. Park your motorcycle on a firm, level
surface.
2. Clean around the oil fill cap/dipstick (1) and
nearby surfaces.
3. Start the engine and let it idle for 3-5
minutes. Stop the engine. Wait 2-3 minutes.
4. Unscrew and remove the oil fill cap/dipstick.
Wipe it clean.
5. Hold the motorcycle upright.
6. Insert the oil fill cap/dipstick until it seats,
but do not screw it in.
7. Remove the oil fill cap/dipstick and check
the oil level.
• If the oil is at or near the upper level mark
(2), you do not have to add oil.
• If the oil is below or near the lower level
mark (3), add the recommended oil until it
reaches the upper level mark. (Do not
overfill.)
8. Insert the oil fill cap/dipstick and screw it in
tightly.
9. Check for oil leaks.
Checking & Adding Oil
(2)
(3)
(1) oil fill cap/dipstick
(2) upper level mark
(3) lower level mark
RIGHT SIDE
(1)