Changing Engine Oil & Filter
Changing the oil and filter requires special
tools. We recommend that you have your
vehicle serviced by your dealer.
Use a new Honda Genuine oil filter or
equivalent specified for your model.
NOTICE
Using the wrong oil filter can result in serious
damage to the engine.
1.
Remove the skid plate.
2.
If the engine is cold, idle the engine for 3
to 5 minutes.
3.
Turn the ignition switch to the (Off)
position and wait for 2 to 3 minutes.
4.
Place your vehicle on a firm, level surface.
5.
Place a drain pan under the drain bolts.
6.
Remove the oil fill cap, drain bolts, and
sealing washers to drain the oil.
7.
Remove the oil filter with a filter wrench
and let the remaining oil drain out. Make
sure the prior seal is not stuck to the
engine.
u
Discard the oil and oil filter at an
approved recycling centre.
20190704203539_32MKS6000_eng_BOOK Page 267 Thursday, July 04 2019 20:57:26 JST
Engine Oil
u
Changing Engine Oil & Filter
Maintenance
262
Sealing washers
Drain bolts
Содержание CRF1000 Africa Twin
Страница 5: ...20190704203539_32MKS6000_eng_BOOK Page 5 Thursday July 04 2019 20 57 26 JST ...
Страница 114: ...20190704203539_32MKS6000_eng_BOOK Page 114 Thursday July 04 2019 20 57 26 JST Operation Guide 109 ...
Страница 120: ...20190704203539_32MKS6000_eng_BOOK Page 120 Thursday July 04 2019 20 57 26 JST Operation Guide 115 ...
Страница 142: ...20190704203539_32MKS6000_eng_BOOK Page 142 Thursday July 04 2019 20 57 26 JST Operation Guide 137 ...