108 |
| 109
DRIVING
DRIVING
Road Departure Mitigation (RDM)
Alerts and helps to assist you if the system determines a possibility of your
vehicle unintentionally crossing over detected lane markings while driving
between 45–90 mph (72–145 km/h).
If your vehicle is getting too close to
detected lane markings without a turn
signal activated a message appears in
the Driver Information Interface. Steering
wheel torque is applied to help your
vehicle stay in the lane.
Braking may also be applied if the lane
lines are solid and continuous.
If the system operates several times
without detecting driver response, the
system beeps to alert you.
Steering assistance
n
Turning the System On or Off
Press the rDM button to turn the
system on or off. A green indicator
appears on the button when the
system is on, and a message briefly
appears.
RDM Button
Indicator
n
Changing Settings
Determine the warning type.
1. From the HoMe screen, select Settings.
2. Select vehicle. The vehicle must be in Park (P).
3. Select Driver Assist System Setup.
4. Select road Departure Mitigation Setting.
•
Normal (default):
Steering control starts from inside the lane
edge.
•
Wide:
Steering control starts from outside the lane edge
•
Warning Only:
The system only provides a BrAKe message and
steering wheel vibrations, but does not apply steering torque or
braking.
•
Narrow:
Steering control starts from further inside the lane
edge than Normal setting.
6. Press BACK to exit the menu.
Important Safety Reminder
The rDM system has limitations. over-reliance on it may result in a collision. It
is always your responsibility to keep your vehicle within the driving lane.
Содержание Clarity Plug In Hybrid 2018
Страница 1: ...2018 PLUG IN HYBRID OWNER S GUIDE...