Honda Civic Type R 2017, Руководство пользователя, Страница: 737 / 813

uu If a Tyre Goes Flat u Changing a Flat Tyre *
736
Han
d
lin
g the U
n
expected
1. Place the jack under the jacking point
closest to the tyre to be changed.
2. Turn the end bracket clockwise as shown in
the image until the top of the jack contacts
the jacking point.
u Make sure that the jacking point tab is
resting in the jack notch.
3. Raise the vehicle, using the jack handle bar
and the jack handle, until the tyre is off the
ground.
■
How to Set Up the Jack
1 How to Set Up the Jack
The jack that came with your vehicle has the
following label.
1. See Owner’s Manual.
2. Never get under vehicle when supported by jack.
3. Place jack underneath reinforced area.
WARNING: The jack shall be placed on a flat and
stable surface on the same level as the vehicle is
parked.
3
WARNING
The vehicle can easily roll off the jack,
seriously injuring anyone underneath.
Follow the directions for changing a tyre
exactly, and no person should place any
portion of their body under a vehicle that is
supported by a jack.
Models with rear fog light
Jacking Points
Jacking Point
Jack
Handle
Bar
Wheel Nut
Wrench as Jack Handle
17 CIVIC 5D (KE KG)-32TGG6000.book 736 ページ ２０１７年１０月２０日 金曜日 午前１１時４９分