Honda Civic Type R 2017, Руководство пользователя, Страница: 232 / 813

231
uu Operating the Switches Around the Steering Wheel u Auto High-Beam *
Co
ntrols
■
To manually cancel the system temporarily
You can cancel the operation when you manually change the headlights to high
beams. Push the lever forward until you hear a click, or lightly pull the lever towards
you to flash high beams. The auto high-beam indicator goes off.
If you want the auto high-beam operation to resume at once, pull and hold the lever
towards you for a few seconds.
Adjust the system when the vehicle is parked
with the ignition switch in ON
( w *1 and the
light switch is in the AUTO position.
To disable the system: Pull the light switch
lever towards you and hold it for 40 seconds.
The auto high-beam indicator in the meter will
blink twice.
To enable the system: Pull the light switch
lever towards you and hold it for 30 seconds.
The auto high-beam indicator in the meter will
blink once.
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an
ignition switch.
■
To Adjust the System
1 To Adjust the System
The auto high-beam is in the previously selected
disabled or enabled setting each time you start the
engine.
AUTO Position
17 CIVIC 5D (KE KG)-32TGG6000.book 231 ページ ２０１７年１０月２０日 金曜日 午前１１時４９分