Honda Civic Type R 2017, Руководство пользователя, Страница: 231 / 813

uu Operating the Switches Around the Steering Wheel u Auto High-Beam *
230
Co
ntrols
Turn the headlight switch in AUTO and pull
the headlight lever to low beam.
2 Light Switches P. 221
The auto high-beam indicator comes on.
■
Temporary cancellation
The auto high-beam operation is temporarily cancelled while:
• You are continuously driving at a speed below 24 km/h (15 mph).
• The vehicle speed is below 10 km/h (6 mph).
• The windscreen wipers run at high speed for more than a few seconds.
The system operation resumes once the condition that caused it to cancel improves.
■
To Operate the System
1 To Operate the System
For the auto high-beam to work properly:
•
Do not place an object that reflects light on the
dashboard.
•
Keep the windscreen around the camera clean.
When cleaning the windscreen, be careful not to
apply the windscreen cleanser to the camera lens.
•
Do not attach an object, sticker or film to the area
around the camera.
•
Do not touch the camera lens.
If the camera receives a strong impact, or repairing of
the area near the camera is required, consult a dealer.
If the message appears:
•
Use the climate control system * to cool down the
interior and, if necessary, also use demister mode
with the airflow directed towards the camera.
•
Start driving the vehicle to lower the windscreen
temperature, which cools down the area around
the camera.
If the message appears:
•
Park your vehicle in a safe place, and clean the
windscreen. If the message does not disappear
after you have cleaned the windscreen and driven
for a while, have your vehicle checked by a dealer.
Headlight Switch
* Not available on all models
17 CIVIC 5D (KE KG)-32TGG6000.book 230 ページ ２０１７年１０月２０日 金曜日 午前１１時４９分