Audio System
Operating the Radio
The ignition switch must be in AC-
CESSORY (I) or ON (II) to operate
the audio system. Turn the system
on by turning the ON/VOL knob
clockwise. The radio comes on and
displays the frequency of the
station it was last tuned to.
Adjust the volume by turning the
ON/VOL knob.
Select the band you want to listen
to by pressing the A M / F M button.
You will see the selected band and
the frequency in the display.
ST will be displayed next to the fre-
quency if the station is broadcast-
ing in FM stereo. The AM stereo
feature is not available.
You can use any of three methods
to find radio stations on the
selected band: TUNE, SEEK, or
the Preset buttons.
The SEEK function searches for
radio stations with strong signals.
Every time you press the SEEK
button, it advances to the next
station.
Use the TUNE bar to change the
frequency in small increments.
Press the top ( ) to go up, and the
bottom ( ) to go down. Press and
release to change the frequency to
the next number.
Press the T U N E bar and hold it to
go to a frequency that is far away.
The frequency display will begin to
count rapidly. It will stop counting
when you release the bar.
Comfort and Convenience Features
ON/VOL KNOB
SEEK BUTTON
STEREO INDICATOR
TUNE BAR
AM/FM BUTTON
Main Menu
Table of Contents
▲
▼