Removing & Installing Body Components
Battery
#
Removal
Make sure the ignition switch is in the OFF
position.
1.
2.
Remove the bolt.
3.
Disconnect the negative
-
terminal from
the battery.
4.
Disconnect the positive
+
terminal from
the battery.
5.
Remove the battery taking care not to
drop the terminal nuts.
u
Pull out the battery and battery holder
together from vehicle.
#
Installation
Install the parts in the reverse order of
removal. Always connect the positive
+
terminal first. Make sure that bolts and nuts
are tight.
Make sure the clock information is correct
after the battery is reconnected.
For proper handling of the battery, see
“Maintenance Fundamentals.”
Maintenance
65
Battery holder
Positive terminal
Negative terminal
Battery
Bolt
Содержание CBR250RR 2021
Страница 1: ...CBR250RR...
Страница 114: ......
Страница 115: ...32K64C00 00X32 K64 C000 XXXX 20XX XX L PRINTED IN XXXXX...