Honda CBR125R, Руководство пользователя

Страница: 80 / 430

MAINTENANCE
3-24
CLUTCH SYSTEM
Measure the clutch lever freeplay at the end of the
clutch lever.
The adjuster may
be damaged if it is
positioned too far
out, leaving minimal
thread
engagement.
Minor adjustment is made with the upper adjuster
at the clutch lever.
Loosen the lock nut and turn the adjuster.
If the adjuster is threaded out near its limit and the
correct freeplay cannot be obtained, turn the
adjuster all the way in and back out one turn.
Tighten the lock nut while holding the adjuster.
Recheck the clutch lever freeplay.
Major adjustment is made with the lower adjusting
nut at the clutch lifter lever.
Loosen the lock nut and turn the adjusting nut to
adjust the freeplay.
Tighten the lock nut while holding the adjusting nut.
If proper freeplay cannot be obtained, or the clutch
slips during test ride, disassemble and inspect the
clutch (page 10-9).
HEADLIGHT AIM
Support the motorcycle in an upright position.
Adjust the headlight aim vertically by turning the
vertical beam adjusting screw.
A clockwise rotation moves the beam up and coun-
terclockwise rotation moves the beam down.
FREEPLAY: 10 – 20 mm (3/8 – 13/16 in)
10 – 20 mm (3/8 – 13/16 in)
LOCK NUT
ADJUSTER
LOCK NUT
ADJUSTING NUT
Adjust the headlight
aim as specified by
local laws and
regulations.
VERTICAL BEAM ADJUSTING SCREWS