Honda CBR125R, Руководство пользователя

Страница: 183 / 430

ENGINE REMOVAL/INSTALLATION
7-3
SERVICE INFORMATION
GENERAL
• A hoist or equivalent is required to support the motorcycle when removing and installing the engine.
• When removing/installing the engine, tape the frame around the engine beforehand for frame protection.
• The following components can be serviced with the engine installed in the frame.
– Oil pump (page 4-4)
– Camshaft (page 8-8)
– Clutch (page 10-9)
– Gearshift linkage (page 10-15)
– Stator/CKP sensor (page 11-6)
– Flywheel (page 11-7)
– Starter motor (page 18-6)
• The following components require engine removal for service.
– Cylinder head/valves (page 8-15)
– Cylinder/piston (page 9-4)
– Crankshaft/balancer (page 12-8)
– Transmission (page 12-12)
SPECIFICATIONS
TORQUE VALUES
ITEM SPECIFICATIONS
Engine oil capacity At draining 1.0 liter (1.1 US qt, 0.9 lmp qt)
At disassembly 1.3 liters (1.4 US qt, 1.1 lmp qt)
Engine dry weight 24.7 kg (54.5 lbs)
Engine hanger nut (upper) 60 N·m (6.1 kgf·m, 44 lbf·ft)
(lower) 60 N·m (6.1 kgf·m, 44 lbf·ft)
(front) 60 N·m (6.1 kgf·m, 44 lbf·ft)
Drive sprocket fixing plate bolt 10 N·m (1.0 kgf·m, 7 lbf·ft)
Water hose band screw – See page 6-14