1 Setting of REV indicator:
You can change the setting of the REV
indicator.
REV indicator blinks during setting.
a
To change the setting mode B, turn the
ignition switch to the (On) position while
pressing
SEL
button until the initial
animation ends. The display moves to the
setting of "REV indicator blinking fastest
RPM". At the same time, the numerical
tachometer and the blinking bar segments
show the current settings of the "REV
indicator blinking fastest RPM".
u
Tachometer bar blinks only while setting
of REV indicator.
20180925141151_32MKPA000_eng_BOOK Page 41 Tuesday, September 25 2018 14:19:26 JST
Operation Guide
38
Instruments
(Continued)
SET
button
SEL
button
Tachometer
REV indicator
Numerical
tachometer
