Setting Mode B
If the
SET
button is not pressed for about 30
seconds, the control is automatically switched
from the setting mode to the ordinary
display.
If the
SET
button is not pressed for about 30
seconds, items in the process of being set will
be discarded and only items where settings
have been finalised will be applied. Only if
the ignition switch is turned to the (Off)
position will items in the process of being set
and those that are finalised be applied.
1 Setting of REV indicator:
You can change the setting of the REV
indicator.
REV indicator is blinking while setting.
20200908111102_32K94B100_eng_BOOK Page 31 Tuesday, September 08 2020 11:13:26 JST
Operation Guide
28
Instruments
(Continued)
Numerical
tachometer display
SET
button
SEL
button
Tachometer
REV indicator
