Honda AQUATRAX R-12, Руководство пользователя

Страница: 85 / 252

6. Immediately after the engine starts, release
the engine start button. The jet pump will
be producing thrust and the PWC will
move slowly.
7. If the engine does not start within 5
seconds, release the start button and wait
30 seconds before trying again, to avoid
discharging the battery or damaging the
starter motor.
The starter motor can operate while the
display is indicated (10 seconds) even if the
lock clip is pulled out from the engine stop
button/switch.
If the engine fails to start after repeated
attempts, it may be flooded with excess fuel.
To clear a flooded engine:
1. Open the throttle fully.
2. Press the start button for 5 seconds.
3. Follow the normal starting procedure.
4. If the engine starts, then open the throttle
slightly if idling is unstable.
If the engine does not start, wait 10
seconds, then follow steps 1
– 3 again.
If the engine still won ’ t start, refer to If Your
Engine Quits or Won
’
t Start, page 183 .
Starting & Stopping the Engine
Basic Operation & Riding
77
Flooded Engine