Honda AQUATRAX R-12, Руководство пользователя

Страница: 141 / 252

8. Apply a thin coat of engine oil to the
rubber seal (6) of a new oil filter.
(6) oil filter rubber seal
9. Install the new oil filter and tighten it by
hand.
10.Using an oil filter wrench attachment
and a torque wrench, tighten the new oil
filter to the specified torque:
20 lbf
·
ft (26 N
·
m, 2.7 kgf
·
m)
Servicing Your Honda
133
Engine Oil & Filter
(6)
11. Install the oil drain pipe cap.
Add Engine Oil:
12. Fill the oil tank with the recommended oil
slowly (page 124).
If the oil filter was replaced, use
approximately:
• ARX1200T2
4.5 US qt (4.3
R
)
• ARX1200N2
4.3 US qt (4.1
R
)
If the oil filter was not replaced, use
approximately:
• ARX1200T2
4.4 US qt (4.2
R
)
• ARX1200N2
4.2 US qt (4.0
R
)
(cont’d)