256
uu
HomeLink
®
Universal Transceiver
u
Training HomeLink
Features
Training HomeLink
If it is necessary to erase a previously entered
learned code:
•
Press and hold the two outside buttons for
about 20 seconds, until the red indicator
blinks. Release the buttons, and proceed to
step 1.
•
If you are training the second or third
button, go directly to step 1.
The instructions on the next page should work for most gate or garage openers, but
may not work for all. For detailed instructions about your specific remote opener,
visit
or call (800) 355-3515.
Red Indicator
17 NSX-31T6N6000.book 256 ページ 2016年4月22日 金曜日 午後3時44分