Honda Accord 4D 2003-2006, Руководство пользователя, Страница: 259 / 525

−
−
−
You can use any of five methods to
find radio stations on the selected
band: TUNE, SEEK, SCAN, AUTO
SELECT, and the preset icons.
Use the TUNE knob to
tune the radio to a desired frequency.
Turn the knob clockwise to tune to a
higher frequency, or anticlockwise to
tune to a lower frequency.
The ignition switch must be in
ACCESSORY (I) or ON (II) to
operate the audio system. Turn the
system on by pressing the PWR/
VOL knob or the AM/FM button.
Adjust the volume by turning the
PWR/VOL knob.
The band and frequency that the
radio was last tuned to is displayed.
To change bands, press the AM/FM
button. On the FM band, ST will be
seen in the upper display if the
station is broadcasting in stereo.
Stereo reproduction on AM is not
available.
The SEEK function
searches the band for a station with
a strong signal. To activate it, press
and release the SEEK bar (
or
). Depending on which side of
the SEEK bar you press, the system
scans upward or downward from the
current frequency. It stops when it
finds a station with a strong signal.
The SCAN function
samples all the stations with strong
signals on the selected band. To
activate it, touch the SCAN icon at
the bottom of the display. You will
see SCAN in the upper display. The
system will scan up the band for a
station with a strong signal. When it
finds one, it will stop and play that
station for approximately five
seconds. If you do nothing, the
system will then scan for the next
strong station and play that for five
seconds. When it plays a station that
you want to continue listening to,
touch the SCAN icon again.
Operating the Radio
TUNE
SEEK
SCAN
Comf ort and Convenience Features
Audio System (E Type)
256
03/09/03 14:42:21 32SEA610_259