132 |
| 133
DRIVING
DRIVING
n
Turning the System On or Off
Press the safety support switch. Roll
the left selector wheel to the RDM
symbol and push it.
The message appears on the driver
information interface when the
system becomes on or off.
The RDM is in the previously selected
ON
or
OFF
setting each time you start
the power system.
Left selector wheel
Safety support switch
n
Changing Settings
Determine the warning timing. The vehicle must be in Park (P) with the
power mode in
ON
.
Models with Color Audio
1. Press the
MENU/CLOCK
button, then select
Settings
.
2. Select
Vehicle Settings
.
3. Select
Driver Assist System Setup
.
4. Select
Road Departure Mitigation Setting
.
5. Select from the options.
Normal (default):
Steering control starts from inside the lane edge.
Wide:
Steering control starts from outside the lane edge.
Warning Only:
The system only provides a
BRAKE
message, but does not
apply steering or braking.
Narrow
: Use for driving on narrow roads.
Models with Display Audio
1. Press the
HOME
button, then select
Settings
.
2. Select
Vehicle
.
3. Select
Driver Assist System Setup
.
4. Select
Road Departure Mitigation Setting
.
5. Select from the options.
Normal (default):
Steering control starts from inside the lane edge.
Wide:
Steering control starts from outside the lane edge.
Warning Only:
The system only provides a
BRAKE
message, but does not
apply steering or braking.
Narrow
: Use for driving on narrow roads.
*if equipped
Traffic Sign Recognition System
Reminds you of road sign information, such as the current speed limit, your
vehicle has just passed through, showing it on the driver information interface
and the head-up display *.
When main mode is selected
When main mode is not selected
Speed Limit Sign
Driver information interface
Head-up display
*
Head-up display
*
Driver information interface
Speed Limit Sign
Limitations
: Several vehicle and environmental conditions can cause the
system not to recognize signs.
Not all signs may be displayed, but any signs posted on roadsides should not
be ignored. The system does not work on the designated traffic signs of all the
countries you travel, nor in all situations.
Do not rely too much on the system. Always drive at speeds appropriate for the
road conditions.
Important Safety Reminder
Like all assistance systems, the RDM system has limitations.
Over-reliance on the RDM system may result in a collision. It is always your
responsibility to keep the vehicle within your driving lane.
The RDM system only alerts you when lane drift is detected without a turn
signal in use. The RDM system may not detect all lane markings or lane or
roadway departures; accuracy will vary based on weather, speed and lane
marker condition. It is always your responsibility to safely operate the vehicle
and avoid collisions.
