56 |
| 57
VEHICLE CONTROLS
VEHICLE CONTROLS
Indicator
I HomeLink
Button
III HomeLink Button
HomeLink
®
Universal Transceiver*
The HomeLink® Universal Transceiver can be programmed to operate up to
three remote controlled devices around your home, such as garage doors,
lighting, or home security systems.
Heated Steering Wheel *
(Canadian Models)
The power mode must be in ON to use
the heated steering wheel.
Press the button on the lower side of the
steering wheel.
When a comfortable temperature is
reached, press the button again to turn
it off.
Do not use the heated steering wheel continuously when the power system is
off. Under such conditions, the 12-volt battery may be weakened, making the
power system difficult to start.
The heated steering wheel is turned off every time you start the power system,
even if you turned it on the last time you drove the vehicle.
n
Training a Button
Park near the system you want to program and follow the instructions in the
flowchart below:
Complete
Training
HomeLink LED is
continuously on green
.
3b.
Canadian Garage Door Opener
A. Press and release the HomeLink
button. Press, hold and release the
button on the remote every 2 secs.
Does the HomeLink indicator (LED)
change from
slowly flashing orange to
rapidly flashing or continuously on
green
? The process should take less
than 60 seconds.
3a.
Hold the button on the remote
1.
Position the remote transmitter you wish to link 1 to 3 inches (3 - 8 cm) from
the HomeLink
®
button you want to program.
2.
Press and hold the desired HomeLink button. Is the HomeLink indicator (LED)
slowly
flashing orange
?
YES
NO
transmitter. Does HomeLink indicator
(LED) change from
slowly flashing
orange to rapidly flashing green or
continuously on green
? The process
should take less than 60 seconds.
4.
Press and hold the programmed HomeLink
button for about a second. Does the device
(garage door opener) work?
YES
NO
5.
Press and hold the HomeLink button again.
6.
Press and hold the HomeLink button
HomeLink indicator
rapidly flashes
green
.
5a.
The remote has a rolling code. Press the
“learn” button on the remote-controlled
device (e.g. garage door opener).
again.
The remote-controlled device should
operate.
Training
Complete
5b.
Within 30 secs, press and hold the
programmed HomeLink button for 2
secs.
Press and hold the programmed HomeLink
button for about a second. Does the device
(garage door opener) work?
4.
To retrain a button or erase codes, see the Owner’s Manual at
owners.
honda.com
(U.S.)
or
www.myhonda.ca
(Canada). If you need help, visit
www.homelink.com
or call the HomeLink Hotline (North America only) at
(800) 355-3515.
*if equipped