42 |
| 43
VEHICLE CONTROLS
VEHICLE CONTROLS
Interior and Exterior Lights
Operate interior and exterior lights when the vehicle is on or off.
n
Brightness Control
Adjust instrument panel brightness
when the vehicle is on.
To brighten:
Turn the wheel upward.
To dim:
Turn the wheel downward.
A beep sounds when the brightness
reaches its minimum or maximum.
When it is bright outside and
headlight integration* with wipers
are activated, the instrument panel
brightness does not change.
HUD
TRIP
Control dial
n
Interior Lights
Change the interior light settings using the switch on the ceiling.
ON position (rear):
Interior lights remain on.
Door-activated position:
Interior lights come on when any of the doors are
opened, the driver’s door is unlocked, orthe vehicle is turned off.
OFF position:
Interior lights remain off.
Map lights:
Press the map lights to turn on or off.
*if equipped
Front*
Off
Door activated position
Rear
Off
On
Door activated
position
n
Exterior Lights
Rotating the light switch turns the
lights on and off.
OFF:
All exterior lights are off.
:
Turn on exterior lights except
headlights.
AUTO:
Turn on the automatic
lighting feature. Headlights turn
on or off depending on ambient
brightness when the vehicle is on.
Headlights automatically* come on after the wipers are engaged for
a certain time. When you turn the light switch to AUTO, the headlights and
other exterior lights will switch on and off automatically depending on the
ambient brightness. The headlights come on when you unlock a door in dark
areas with the headlight switch in AUTO.
:
Turn on all exterior lights including headlights.
:
Turn fog lights* on or off.
Auto High-Beam System
Using a camera mounted to the inside of the windshield, this system detects
light sources ahead of the vehicle. Depending on the light source, the system
automatically switches the headlights to high beam for optimal visibility at night.
n
How It Works
When the camera detects lights coming from a preceding or oncoming
vehicle, the headlights remain in low beam. When the camera detects no
lights coming from a preceding or oncoming vehicle, the headlights change
to high beam. The view angle or distance that the camera can detect lights
ahead differs depending on conditions, such as the brightness of the lights
and the weather.
n
System Operation Conditions
The system operates when:
• The headlight switch is in
AUTO
.
• The lever is in the low beam position.
• The low beams are on and the system recognizes that your are driving at
night.
• The vehicle speed is above 25 mph (40 km/h).
Opening the moonroof in below freezing temperatures or when it is covered
with snow or ice can damage the moonroof panel or motor.
NOTICE
High Beams
Flashing the high beams
Low Beams
Fog Lights
Automatic Lighting Control
*if equipped
