40 |
| 41
VEHICLE CONTROLS
VEHICLE CONTROLS
Power Window Operation
The power windows can be opened and closed when the vehicle is on by using
the switches on the doors. The switches on the driver’s side can be used to
open and close all the windows.
n
Manual Operation
To open:
Push the switch down lightly and hold it until the desired position is
reached.
To close:
Pull the switch up lightly and hold it until the desired position is
reached.
n
Power Window Lock
Push in the power window lock button so only the driver’s window can be
operated.
Power Moonroof Operation*
The moonroof can be opened and closed when the vehicle is on by using the
switch on the ceiling.
n
Automatic Operation
To open:
Push the switch back
firmly.
To close:
Push the switch forward
firmly.
The moonroof opens or closes
completely. To stop the moonroof at
any time, push the switch briefly.
n
Manual Operation
To open:
Push and hold the switch back until the desired position is
reached.
To close:
Push and hold the switch forward until the desired position is
reached.
n
Moonroof Tilt
To tilt:
Push the center of the switch.
To close:
Push the switch forward firmly, then release.
Closing a power window on someone’s hands or fingers can cause
serious injury. Make sure your passengers are away from the windows
before closing them.
WARNING
Closing the moonroof on someone’s hands or fingers can cause serious
injury.
Make sure your passengers are away from the moonroof before closing it.
WARNING
*if equipped
n
Using the Trunk Release Button
Push up the release button on the
trunk lid after the doors are unlocked.
Even if the trunk is locked, you can
open the trunk if you carry the smart
entry remote.
Trunk Release
Button
n
Using the Emergency Trunk Opener
The trunk release lever allows you
to open the trunk from inside for
your safety.
Slide the release lever in the
direction of the arrow.
Parents should decide if their
children should be shown how to
use this feature.
Lever
n
Auto-Open/Close Function
To open:
Push the switch down
firmly.
To close:
Pull the switch up firmly. The
window opens or closes completely.
To stop the window at
any time, push or pull the switch
again briefly.
Auto Reverse
If a power window senses resistance
when closing automatically, it will
stop closing and reverse direction.
The driver’s window auto reverse function is disabled when you
continuously pull up the switch. The auto reverse function stops sensing
when the window is almost closed to ensure that it fully closes.
On
Off
Power Window
Lock Button
Indicator
Window
Driver’s
Switch
Front Passenger’s
Window Switch
Close
Tilt
Open
