Honda 3755790, Руководство оператора

Страница: 7 / 12

The plow is correctly landed when the
running clearance between the lower links
and the tires
is
approximately equal, and the
upper link extends straight behind the
tractor.
The plow bottom reacts like
a
rudder while
the
ground
is
engaged. If the plow point
is
too
f a r from the left of the
b e a m ,
the plow
will
and leave!
a
wall.
To
adjust, loosen the bolts attaching the
landside of the standard and
turn
the land
adjusting bolt clockwise two turns. Retighten
the attaching bolts. Repeat the adjustment,
if
until
the plow follows the tractor
Leveling
With the tractor running in a previously
plowed furrow at the desired depth and width
of cut, stop the tractor with the plow in the
ground and inspect the
unit from the rear.
The should be near
vertical
from
the ground. If it appears to lean to the right,
raise
the right side link by the rod
clockwise,
or lower the left side by turning
its
rod Reverse the
adjustments for a left-leaning standard.
coulter
The coulter should slice
-
deep. To
adjust, loosen the clamp securing the
standard and
raise
or lower the
assembly.
Also, check the blade swing:
It should be free
to
outward
a
from the
beam
but should not swing in to touch the
beam
or
plow bottom. Adjust the stop pin as
required.
LOOSEN THESE BOLTS
BEFORE ADJUSTING
LAND ADJUSTING BOLT
TOP VIEW
N