Honda 3755790, Руководство оператора

Страница: 6 / 12

OPERATION
of
Cut
Following assembly and initial
adjustments, the plow cut width
will be
1 when the right wheel
is
running
against
the furrow wall.
To change the width, loosen the U-Bolts and
move the
beam
along the mast an inch at a
time to the
best
width: Move to the
right
to
decrease, and to the left to increase
the width.
NOTE. Under extreme
or
heavy plowing
conditions, you may prefer to reduce the
cut
width, than the plow depth, to avoid
overloading the tractor.
,UPPER LINK
T h e plow point pitch (or is controlled
by the hitch upper link. Shortening the
link
will
make the plow
go
lengthening the
DEPTH GAUGE WHEEL
link will cause the plow to run shallow. With
the link pre-adjusted as described earlier, the
plowing depth should be
-
when the
tractor wheels
are
running in a previously
plowed
NOTE:
readjust the gauge wheel and
check the plow lever
( s e e
next page) after
changing the plowing depth.
UPPER U N K