Honda 2014 Odyssey, Руководство пользователя, Страница: 207 / 589

uu Operating the Switches Around the Steering Wheel u Driving Position Memory System *
206
Co
ntrols
1. Set the power mode to ON. Adjust the
driver’s seat to the desired position.
2. Press the SET button.
u You will hear the beeper, and the
memory button indicator light will blink.
3. Press and hold memory button ( 1 or ( 2
within five seconds of pressing the SET
button.
u Once the seat position has been
memorized, the indicator light on the
button you pressed stays on and you will
hear the double-beep.
1. Put the transmission into
( P
.
2. Apply the parking brake.
3. Press a memory button ( ( 1 or ( 2 ).
u You will hear the beeper, and the
indicator light will blink.
The seat will automatically move to the
memorized position. When it has finished
moving, you will hear the beeper, and the
indicator light stays on.
■
Storing a Position in Memory
1 Storing a Position in Memory
After you press the SET button, the storing operation
will be cancelled when:
•
You do not press the memory button within five
seconds.
•
You readjust the seat position before the double-
beep.
•
You set the power mode to any position except
ON.
Memory
Button 1
Memory
Button 2
SET Button
■
Recalling the Stored Position
1 Recalling the Stored Position
The seat will stop moving if you:
•
Press the SET button or memory button
( 1
or
( 2
.
•
Adjust the seat position.
•
Put the transmission into a position other than
( P
.
Memory
Button 1
Memory
Button 2
21 ODYSSEY CSS (KF KP KQ KU KY)-42T6A6700.book 206 ページ ２０２０年１０月２日 金曜日 午後１２時８分