7
|
P a g e
TEMPERATURE ADJUSTMENTS
Adjustment gear (A) is factory-set to prevent the stem from
reaching full hot position.
To adjust stem rotation:
1.
Remove adjustment gear (A).
2.
Rotate stem (B) counterclockwise to determine a
maximum desired temperature.
3.
Replace gear aligning adjustment stop (C) to stem tab
surface (D) to stem (B) so that it cannot move beyond
adjustment point.
PFISTER MAINTENANCE & CARE
Disassembly:
1.
Replacement parts may be available at Lowes or Home
Depot.
2.
When replacement parts are not available, please write or
call Price Pfister Consumer Service.
3.
Always turn off water and release pressure before
working on your faucet.
Note: Trim Care
Cleaning instructions:
•
For all handles and decorative finishes, use only a soft
damp cloth to clean and shine.
•
Use of polish, detergents, abrasive cleaners, organic
solvents, or acid may cause damage.
•
Use of anything other than a soft damp cloth will nullify
the warranty.
•
Trim products which contain porcelain or other similar
substances are not acceptable for public areas or
commercial use.
•
Installation of said trim is at user’s risk!
TROUBLESHOOTING TIPS
•
Temperature or flow does not remain consistent.
o
The cartridge assembly (D) may need cleaning.
▪
Shut off water supply.
▪
Remove handle assembly (A), unscrew retainer
sleeve (B) and remove flange (C).
Содержание STEAM PLANET Galaxy Series
Страница 16: ...14 P a g e ELECTRICAL SCHEMATIC...