will go into the mode of operation before the ice cream is recalled full.
■
Automatic water supply and water shortage reminder mode
- In ice making mode, when the float switch is at the minimum lever line, or the water
tank is not full of water, the water shortage icon lights up, makes a "di-di" sound for 5
seconds and switches to water shortage mode.
- In the water shortage mode, shortly press the ice maker button, the machine will go
into the ice making mode.
■
Ice cube machine is not reset reminder mode
- In the ice cream making or washing mode, if the ice cream maker is not on the ice
cream making or washing station, the icon of the ice cream maker will not reset and a
"di-di" sound will be heard for 5 seconds. The machine will automatically go into the
reminder mode for the ice cream maker that has not been reset yet.
- 20 minutes later, the machine will automatically switch to ice making mode.
- If the ice bucket has not been reset, the machine is put in the ice making mode by
pressing briefly on the ice maker button.
Water injection and drainage
■ Water injection
- Water injection is required when the water volume in the storage area is lower than
the minimum water level mark or water.
- Artificial injection of drinking water into the storage area.
- For each water injection, the volume of water must remain between the maximum
and minimum water level marks and must not exceed the maximum water level mark.
Warning:
Only potable water can be filled.
■ Drainage
- Where the water in the storage area is contaminated or the internal wall of the
storage area needs to be cleaned, drainage should be provided.
- Unplug the power cord before draining the water.
- Move the icemaker so that the water outlet is in a position suitable for manual
operation and drainage.
- Loosen the drain nut and remove the plug, the water will run out by itself.
- After draining, immediately insert the plug and tighten the drain nut.
■ When injecting or draining water, make sure that water is not sprayed on the live
parts of the device to avoid danger
■ When reusing after draining, check for leakage at the drain opening to ensure there
is no leakage to continue use.
Reminder
■ When the ice cube maker is on, do not reach into the ice cube maker to avoid
danger.
■ When using purified or distilled water for making ice, there can be a false alarm of
water shortage, as long as a little salt can be added
■ The design of the refrigerator is not reset reminder mode is a protective function.
In the general
：
- When there is ice or a foreign object around the outside of the ice box
If the ice box is not rotating, it is only necessary to manually remove the ice or foreign
object.
- If the ice on the icicle greatly affects the rotation of the water box, it is necessary to
wait until the ice has melted naturally before using it. It is not allowed to remove the
ice on the icicle by force.
■ In order to avoid contamination of food, please follow the following instructions
：
- Opening the door (lid) for a long period of time can cause a significant increase in
temperature in the ice maker storage area.
- Regularly clean surfaces that may come into contact with food and accessible
drainage systems; Clean the water tank if it has not been used for 48 hours; If there is
water in the tank for more than 5 days, flush the water circulation system connected
to the water supply system.
- If the icemaker is left empty for a long period of time, close it, defrost it, clean it, dry it,
and keep the door (lid) open to prevent mold growth in the icemaker.
Cleaning and maintenance
Cleaning
