Assembly Instructions 2/5
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench as the bolts may need to be tightened in the future.
STEP 1
Place Top (A) and Side Frames (B), (C)
on a soft cloth.
Insert Cam Lock Screws into
pre-drilled holes in Top (A) and
Side Frames (B), (C), then tighten.
(See Figure 1)
Figure 2
STEP 2
Attach Side Frame (C) to Top (A) with Flat Washers,
Spring Washers and Head Cap Bolts,
tightening bolts only halfway.
(See Figure 2)
Attach Back Panel (F) to unit with Flat Washers,
Spring Washers and Head Cap Bolts,
tightening bolts only halfway.
F
Figure 1
C
B
A
C
Cam Lock Screw
Flat Washer
Head Cap Bolt
Spring Washer
A
