Assembly Instructions 2/7
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench in a safe place as the bolts may need to be tightened up in the future.
Head Cap Bolt
Spring Washer
Flat Washer
STEP 1
Attach Stretchers (F) and (G)
to Back Posts (D) and (E) with
Flat Washers, Spring Washers and
Head Cap Bolts, tightening the bolts
only half way. (See Figure 1)
Figure 1
STEP 2
Attach unit and Stretcher (H) to Side Frame (B)
with Flat Washers, Spring Washers and
Head Cap Bolts, tightening the bolts only half way.
(See Figure 2)
Attach Side Frame (C) to unit with Flat Washers,
Spring Washers and Head Cap Bolts, tightening
the bolts only half way.
Figure 2
F
G
E
D
D
B
C
H
