Assembly Instructions 2/3
STEP 1
Insert Cam Lock Screws into pre-drilled
holes of Side Panels (B), (C) and Plinth (E).
(See Figure 1)
STEP 2
Attach Plinth (E) to Base (I)
with Cam Lock. (See Figure 2)
STEP 3
Attach unit from Step 2 and Plinth (G)
to Side Panel (B) with Flat Washers,
Spring Washers, Head Cap Bolts and
Wood Screws. (See Figures 3 and 4)
Figure 3
Figure 4
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
Keep Hex Wrench in a safe place as the bolts may need to be tightened up in the future.
Figure 1
Cam Lock
E
I
Cam Lock Screw
B
C
E
Figure 2
Head Cap Bolt
G
Wood Screw
B
Spring Washer
Flat Washer
