background image

C.
Shelf

1 pc.

D.
Shelf

1 pc.

E.
Support

4 pcs.

F.
Leg

4 pcs.

B.
Apron Frame

1 pc.

Hardware List

Part List

Tool(s) required for assembly:

Level

Phillips screwdriver,

Home Styles Customer Service: www.homestyles-furniture.com,

[email protected],

888-680-7460, 877-831-0319

88 5060 942

Kitchen Island

IMPORTANT

Carton 88 5060 94Q1 or 88 5061 941 is also needed for assembly.

Hex Wrench

1 pc.

Small Hex Wrench

1 pc.

Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.

Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.

Do not use power tools above 8 volts to assemble.

M6x19
Head Cap Bolt (short)

28 pcs. (+1 extra)

Spring Washer

14 pcs. (+1 extra)

Flat Washer

14 pcs. (+1 extra)

M6x32
Head Cap Bolt (long)

4 pcs. (+1 extra)

M6x19
Head Cap Bolt

14 pcs. (+1 extra)

Содержание 88 5060 942

Страница 1: ...1 or 88 5061 941 is also needed for assembly Hex Wrench 1 pc Small Hex Wrench 1 pc Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage Carefully and strictly follow these assembly instructions to ensure a completed product as designed Do not use power tools above 8 volts to assemble M6x19 Head Cap Bolt short 28 pcs 1 extra...

Страница 2: ...included adjustable levelers to level Keep Hex Wrench in a safe place as the bolts may need to be tightened up in the future STEP 2 Attach Supports E to Shelf C with Head Cap Bolts long tightening the bolts only half way See Figure 2 STEP 1 Attach Legs F to Shelves C and D with Head Cap Bolts short tightening the bolts only half way See Figure 1 Tighten all Head Cap Bolts Head Cap Bolt short D F F...

Страница 3: ...s step Head Cap Bolt Spring Washer Flat Washer Head Cap Bolt STEP 4 Attach the base unit to top unit with Flat Washers Spring Washers Head Cap Bolts short and Head Cap Bolts tightening the bolts only half way See Figures 4 and 5 Tighten all Head Cap Bolts used in Steps 2 and 4 Turn the unit over to its upright position B A Figure 3 Figure 4 Figure 5 Figure 6 STEP 5 To level the unit adjust the adj...

Страница 4: ...ADING with a soft cloth moistened in lukewarm soap and water Buff with a dry clean cloth CLEAN Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of purchase Digital images of the defective parts may be required If the product was not purchased from an authorized retail affiliate Home Styles is under no obligation to provide replacement par...

Отзывы: