Assembly Instructions 2/6
Head Cap Bolt (large)
Head Cap Bolt
Spring Washer
Flat Washer
Left Unit
STEP 1
Attach Side (C) to Back (A) with Head Cap Bolts (large).
tightening bolts only halfway.
(See Figure 1)
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
Keep Hex Wrench as the bolts may need to be tightened in the future.
STEP 2
Attach Seat (E) to unit with Dowel,
Head Cap Bolts, Spring Washers and Flat Washers,
tightening bolts only halfway. (See Figure 2)
Tighten all bolts used in Steps 1 and 2.
Figure 2
Figure 1
A
C
E
Dowel
