Assembly Instructions 2/3
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Make sure unit is level before tightening these screws.
Do not tighten all the bolts until each part is properly assembled.
Keep Hex Wrench as the bolts may need to be tightened in the future.
Wood Screw
Arrow label at front
Head Cap Bolt
Spring Washer
Flat Washer
F
E
A
B
C
G
Figure 1
STEP 1
Place Seat (A) upside down on a soft cloth.
Attach Legs (B) and (C) to Seat (A) with Flat Washers,
Spring Washers and Head Cap Bolts,
tightening bolts only halfway.
(See Figure 1)
Attach Stretcher (G) to unit with Wood Screws.
(See Figure 2)
Orientate Stretcher (E) so Arrow label is at front of unit,
then attach Stretcher (E) to Leg (B) with Wood Screw.
(See Figure 3)
Orientate Stretcher (F) so Arrow label is at front of unit,
then attach Stretcher (F) to Leg (C) with Wood Screw.
Figure 2
Figure 3
