Assembly Instructions 2/5
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench and Wrench as the bolts may need to be tightened in the future.
Nut Cap
Nut (medium)
Spring Washer (medium)
Flat Washer (medium)
Bolt
Figure 1
STEP 1
Insert Bolts into pre-drilled holes in Seat (A), then tighten.
(See Figure 1)
Attach Legs (F) to Seat (A) with Flat Washers (medium),
Spring Washers (medium) and Nuts (medium), tightening
Nuts (medium) only halfway.
Tighten all Nuts (medium).
Cover all Nuts (medium) with Nut Caps.
F
F
A
