background image

IMPORTANT

Use only mattress which is 74” – 75” long and 37 1/2" – 38 1/2" wide on upper bunk.

Use only mattress which is 74” – 75” long and 52 1/2“– 53 1/2" wide on lower bunk.

Use only mattress which is 10” or less thick on upper bunk.

Replacement parts, including additional guardrails may be obtained from
Home Styles Customer Service at www.homestyles-furniture.com.

Important

Follow the information on the warnings appearing
on the upper bunk end structure and on the carton.

Do not remove warning label from bed.

Always use the recommended size mattresses to
help prevent the likelihood of entrapment or falls.

Surface of mattress must be at least 5” (127 mm) below the upper edge of guardrails.

Do not allow children under 6 years of age to use the upper bunk.

Periodically check and ensure that the guardrail, ladder, and other components
are in their proper position, free from damage, and that all connectors are tight.

Do not allow horseplay on or under the bed and prohibit jumping on the bed.

Prohibit more than one person on upper bunk.

Always use the ladder for entering and leaving the upper bunk.

Do not use substitute parts.  Contact Home Styles Customer Service
at www.homestyles-furniture.com for replacement parts.

Use of a night light may provide added safety precaution for a child using the upper bunk.

Always use guardrails on both long sides of the upper bunk.  If the bunk bed
will be placed next to a wall, the guardrail that runs the full length of the bed
should be placed against the wall to prevent entrapment between the bed and wall.

The use of water or sleep flotation mattresses is prohibited.

STRANGULATION HAZARD – Never attach or hang items to any
part of the bunk bed that are not designed for use with the bed;
for example, but not limited to, hooks, belts, and jump ropes.

Keep these instructions for future reference.

Safety Warnings

Содержание 20 05530 0565














Отзывы: