Assembly Instructions 2/5
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench as the bolts may need to be tightened in the future.
A
F
D
Cam Lock Screw
STEP 1
Place Top (A) and Side Panels (D), (F)
on a soft cloth.
Insert Cam Lock Screws into
pre-drilled holes in Top (A) and
Side Panels (D), (F), then tighten.
(See Figure 1)
Figure 1
C
STEP 2
Attach Side Panels (D) and (F) to Back Panel (C) with Cam Locks.
(See Figure 2)
Cam Lock
Figure 2
D
F
