HomeMatic HmIPW-WTH, Инструкция по установке и эксплуатации

Страница: 67 / 80

67
Operating modes and configuration
(”OFF”) the optimum start/stop function.
6.5.1 Heating or cooling
You can use your floor heating system to heat rooms dur-
ing winter or to cool rooms during summer.
• Select “HEAT” for heating and “COOL” for cool-
ing in the menu item “type” by turning the control
wheel
(E) and confirm by pressing the control
wheel briefly.
6.5.2 Heating profile numbers
You can select between the following 6 pre-configured
profiles.
• Select the number of the required profile in the
menu item “Pr.nr.” by turning the control wheel
(E) and confirm by pressing the control wheel
briefly.
If the selected profile is a heating profile, the room
is heated as soon as the temperature falls below
the defined value. If the selected profile is a cool-
ing profile, the room is cooled as soon as the tem-
perature increases the defined value.
After switching from “heating” to “cooling” in the menu,
the profiles are changed from profile 1 to 4, profile 2 to 5
and from profile 3 to 6 automatically.