HomeMatic HmIP-SRD, Инструкция по монтажу и руководство по эксплуатации

Страница: 41 / 53

41
Start-up
5.3 Teaching-in
Read this entire section before starting the teach-
in procedure.
First set up your Homematic IP Access Point via
the Homematic IP app to enable operation of
other Homematic IP devices within your system.
For further information, refer to the operating
manual of the Access Point.
You can connect the device either to the Access
Point or to the Homematic Central Control Unit
CCU2/CCU3. For detailed information, refer to the
Homematic IP User Guide, available for download
in the download area of www.homematic-ip.com.
To integrate the device into your system and enable it to
communicate with other Homematic IP devices, it has to
be connected to your Homematic IP Access Point first.
To connect it, proceed as follows:
• Open the Homematic IP app on your smartphone.
• Select the menu item “Teach-in device”
(see
figure 10) .
• After establishing supply voltage via an
appropriate power supply unit the teach-in mode
remains activated for 3 minutes.