35
Start-up
• Teaching-in will be carried out.
• The Access Point is now set up and immediately
ready for use.
5.2
First steps: Connecting devices and
adding rooms
As soon as your Homematic IP Access Point and the
Homematic IP app are ready for use, you can connect
additional Homematic IP devices and allocate them in the
app to different rooms.
• Tap on the main menu symbol at the bottom right
of the app homescreen and select the menu item
“Teach-in device”
.
• Establish the power supply of the device you
want to teach-in, in order to activate the teach-in
mode. For further information, please refer to the
operating manual of the corresponding device.
• Follow the instructions of the app step by step.
• Select the desired solution for your device.
• In the app, give the device a name and create a
new room or allocate the device to an existing
room.
Please define the device names very carefully in
order to avoid assignment errors when using
various devices of the same type. You can change
the device and room names at any time.
